Linux version 2.6.0-test5 (root@t40) (gcc version 3.3.1 20030626 (Debian prerelease)) #6 Tue Sep 9 01:47:58 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff79000 (ACPI data) BIOS-e820: 000000001ff79000 - 000000001ff7b000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130912 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126816 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=Linux2.65 ro root=306 hdc=ide-scsi video=radeonfb:1400x1050-24@60 ide_setup: hdc=ide-scsi Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1595.021 MHz processor. Console: colour VGA+ 80x25 Memory: 513876k/523648k available (2536k kernel code, 9020k reserved, 929k data, 132k init, 0k highmem) Calibrating delay loop... 3153.92 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd906, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f6bf0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9c73, dseg 0x400 PnPBIOS: 21 nodes reported by PnP BIOS; 21 recorded by driver SCSI subsystem initialized Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 09 [IRQ] PCI: Using IRQ router PIIX [8086/24cc] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 6 for device 0000:00:1f.1 PCI: Sharing IRQ 6 with 0000:00:1d.2 PCI: Sharing IRQ 6 with 0000:02:02.0 pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Total HugeTLB memory allocated, 0 ikconfig 0.6 with /proc/ikconfig Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.4 [Flags: R/O]. udf: registering filesystem Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xd0000000 [drm] Initialized radeon 1.9.0 20020828 on minor 0 ipmi: message handler initialized ipmi: device interface at char major 253 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A PCI: Found IRQ 5 for device 0000:00:1f.6 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:02:00.1 pnp: Device 00:12 activated. ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A pnp: Device 00:17 activated. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.1.13-k2 Copyright (c) 1999-2003 Intel Corporation. PCI: Found IRQ 5 for device 0000:02:01.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: Found IRQ 6 for device 0000:00:1f.1 PCI: Sharing IRQ 6 with 0000:00:1d.2 PCI: Sharing IRQ 6 with 0000:02:02.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS05-0, ATA DISK drive Using anticipatory scheduling io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA745 DVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 71941106 sectors (36833 MB) native capacity is 78140160 sectors (40007 MB) hda: 71941106 sectors (36833 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100) hda: TCQ not supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA745 DVD/CDRW Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 PCI: Found IRQ 5 for device 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0498, PCI irq5 Socket status: 30000006 PCI: Found IRQ 5 for device 0000:02:00.1 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.6 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0498, PCI irq5 Socket status: 30000006 Intel PCIC probe: <6>pnp: Device 00:19 activated. Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets host opts [0]: none host opts [1]: none ISA irqs (scanned) = 3,4,7,10<6> PCI card interrupts, polling interval = 1000 ms mice: PS/2 mouse device common for all mice input: PC Speaker Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: Synaptics Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c-i801 version 2.7.0 (20021208) i2c-piix4 version 2.7.0 (20021208) NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed Adding 498920k swap on /dev/hda5. Priority:-1 extents:1 EXT3 FS on hda6, internal journal speedstep-centrino: found "Intel(R) Pentium(R) M processor 1600MHz": max frequency: 1600000kHz drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 5 for device 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 uhci-hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci-hcd 0000:00:1d.0: irq 5, io base 00001800 uhci-hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1d.1 uhci-hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci-hcd 0000:00:1d.1: irq 9, io base 00001820 uhci-hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected PCI: Found IRQ 6 for device 0000:00:1d.2 PCI: Sharing IRQ 6 with 0000:00:1f.1 PCI: Sharing IRQ 6 with 0000:02:02.0 uhci-hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci-hcd 0000:00:1d.2: irq 6, io base 00001840 uhci-hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:0: USB hub found hub 3-0:0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem e08c2000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 4-0:0: USB hub found hub 4-0:0: 6 ports detected Intel 810 + AC97 Audio, version 0.24, 01:45:33 Sep 9 2003 PCI: Found IRQ 5 for device 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.6 PCI: Sharing IRQ 5 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 5 i810: Intel ICH4 mmio at 0xe08c4c00 and 0xe08c6800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS116 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 i810_audio: setting clocking to 48566 drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic drivers/usb/core/usb.c: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 drivers/usb/core/usb.c: registered new driver visor drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver v2.1 NET: Registered protocol family 23 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. e1000: eth0 NIC Link is Up 100 Mbps Full Duplex blk: queue dfcd7200, I/O limit 4095Mb (mask 0xffffffff) cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3c0-0x3e7 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode [drm] Loading R200 Microcode PCI: Found IRQ 5 for device 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 hub 4-0:0: debounce: port 4: delay 100ms stable 4 status 0x501 hub 4-0:0: new USB device on port 4, assigned address 2 hub 4-4:0: USB hub found hub 4-4:0: 4 ports detected hub 4-4:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 4-4:0: new USB device on port 1, assigned address 3 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004 hub 4-4:0: debounce: port 4: delay 100ms stable 4 status 0x301 hub 4-4:0: new USB device on port 4, assigned address 4 drivers/usb/core/usb.c: registered new driver hiddev input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.7-4.4 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver nfs warning: mount version older than kernel nfs warning: mount version older than kernel